12" Dual Cold Cathode Kits These kits each come with two 12" cold
cathodes, a dual inverter, a switch that connects via 4-pin
molex connector, and cable ties and double-sided sticky pads to
aid mounting.
12" Dual Cold Cathode Kits
- Sound
Activated
(they flash along with your music)
As above but in addition
the inverter in the sound activated kits includes a sound module
and there is a PCI bracket with 3-way switch (SC/ON/OFF) and
sound sensitivity knob.
Accessories:
Alphacool Temperature Probe/Sensor Is your computer getting too hot? This device
has a LCD and blue LED backlight to show what temperature a
particular component is running at (i.e. the CPU, chipset, hard
drive, graphics card, RAM, PSU or the general case temperature).
It connects via a 4-pin molex connector (5V).
Cutting of a panel/fascia will be required for proper mounting. The hole size
required is approx. 46 x 26mm so it would fit in a spare CD/DVD drive-bay fascia. At a push
it may fit in a floppy drive-bay fascia but it would be very close.
Power cable and probe lead length are approx. 50cm.
Fan Controller It mounts in a 3.5" drive bay and connects via molex connector.
It can then connect up to three fans by 3-pin fan connectors. It
also provides two USB sockets by connecting to a USB header on
your motherboard.
